Product Description:
Swivel swan neck tap with fixed serrated or removable nozzles
Brass construction
Plastic coating Rilsan
Light grey as standard
Description: Swivel swanneck tap with fixed serrated or removable nozzles.
Applications: Standard laboratory water tap for all applications where header tank supply is present ( Full WRAS approval )
Construction: All brass body “Rilsan” plastic coated, white. Chemical resistant plastic ABS handwheel, Identification coding to DIN13792
Connection and mounting: ½” BSP male flat ended shank x 60mm long with back nut. Standard anti-rotation base with location pin. Two mounting holes 22mm dia and 6mm dia required template enclosed.
Pressure and Flow: Maximum pressure 100PSI ( Recommended 20PSI ), Flow Rate @ 20 psi = 12 Litre/min.
Spares: Handwheel Assembly: Pt No 960180, valve headwork, Pt No 950148. Removable nozzle, Pt No 900130
WRAS: Approved
Water supply:
This should be of high enough pressure to operate science equipment. The supply should be controllable
(e.g. with pressure reducer) for emergency eyewashes. To prevent waste water contaminating the incoming water supply, an air gap at the point of entry to lab, usually using a header tank should be provided, with an electric pump to maintain pressure if needed.
Note: Most school science labs should comply with The Water Supply (Water Fittings) Regulations 1999, fluid category 4, concerning fluid which represents a significant health hazard due to the concentration of toxic substances.
